Large Tool Makers Microscope Manufacturer,Supplier and Exporter
Product Code : SEL-M-10887
Quick Answer: Engineering workshops and metrology labs use the Large Tool Makers Microscope to measure angles, lengths, diameters and point-to-point distances on parts, with 30x standard magnification and a stage that reads to 0.001 mm.
Last updated: October 2026
Key Features
- 2x achromatic objective and WF 15x eyepiece with cross reticle, 30x standard magnification
- Eyepiece protractor graduated in 360° with adjustable vernier reading to 6 min
- 300 x 200 mm threadless stage with built-in linear scales, least count 0.001 mm
- X-Y table travel of 100 x 50 mm; glass plate 200 x 100 mm
- Sub-stage halogen light with collimated green filter, plus LED ring for oblique lighting
- Large, heavy base for overall rigidity
Technical Specifications
| Specification | Value |
|---|---|
| Objective | 2x achromatic |
| Eyepiece | WF 15x with cross reticle |
| Magnification | 30x standard |
| Observation tube | Monocular, inclined at 30° |
| Eyepiece protractor | Graduated in 360°, adjustable vernier reading to 6 min |
| Stage | 300 x 200 mm, threadless, built-in linear scales |
| Least count | 0.001 mm |
| X-Y travel | 100 x 50 mm |
| Glass plate | 200 x 100 mm |
| Illumination | Transmitted halogen light with collimated green filter; oblique LED ring |
About This Product
A tool makers microscope turns viewing into measuring: the part rests on the stage, the cross reticle is lined up with one edge, and the stage scales show how far the table moves to the next point. Angles are read by turning the eyepiece protractor. Light from below gives crisp outlines of profiles, while the LED ring shows surface detail from the side. Engineering colleges use it for practicals on metal, plastic, electronic and automotive parts. The Large Tool Makers Microscope can be packed for export to Sudan, Democratic Republic of the Congo, Lesotho, Bhutan and United Kingdom.
Frequently Asked Questions
How fine are the stage measurements?
The built-in linear scales on the 300 x 200 mm stage have a least count of 0.001 mm, and the X-Y table travels 100 x 50 mm.
Can the Large Tool Makers Microscope measure angles?
Yes. Its eyepiece protractor is graduated in 360° with an adjustable vernier reading to 6 minutes, coupled to the monocular tube, which is inclined at 30°.
What lighting does it use?
A sub-stage halogen lamp with a collimated green filter gives transmitted light from below, and an LED ring provides oblique light on the part.
Related: Microscopes, Shop Microscope, Vernier Microscope, Metallurgical and Industrial Inspection Microscope.
For a quotation on the Large Tool Makers Microscope, contact School Educational Instrument.
