You have searched for products starting with "C"

Compound Microscope is a tool that can be used for many purposes. From medical research to a day at the beach View Details

This anatomical colon model is the reproduction of a Colon with a variety of Pathologies View Details
.jpg)
This Apparatus demonstrates that Capillary rise is dependent upon the inside diameter of the tube. View Details

This educational kit contains materials and instructions suitable for safe hands-on inquiry-based experimentation into the nature and properties of air pressure. View Details
.jpg)
A wooden stand nicely polished with heavy metal base,finished in grey colour having levelling screws. View Details

The offered oscilloscope has many uses, including voltage measurement, observation of wave forms, frequency comparison and time measurement. View Details

This cavity tile is made of strong, white, unbreakable plastic and is a good substitute for porcelain tiles. View Details

The build a 1-1/2 to 6 volt power source and use it to power our motors. Includes: 1 terminals, plastic holder, rubber band, instructions. View Details
.jpg)
The Hand Driven Centrifuge for 4 tubes with swing out head & polyamide made buckets. View Details

The technically sound Clinostat Clock Type can be purchased here for laboratory demonstrations & experiments. View Details

The filters, glass, 420, 470, 530, 620, 660 nm. Displays digital (20F) or turnout (19F) display. View Details

The suitable for KS3 +. 300mm long and 3mm dia. For Thermal Conductivity experiments. View Details

An insulating stand on tripod base, hammers tone finish, three different shapes of medium size conductors are provided in the set. View Details

The consisting of a copper calorimeter of 5*7.5cm size with outer vessel of well-polished wood fitted with Bakelite top with hole for thermometer and stirrer. View Details

We offer high quality Aluminum Calorimeter to our valuable customers. Offered calorimeters are manufactured from optimum quality aluminum with 75 x 50 mm and 100 x 75 mm View Details

To show the convection of heat in a liquid. Glass tube 20 mm outer diameter bent into rectangle approx. View Details

The comprising partly evacuated glass bulb approx 70mm dia, with contained at its centre a fine pivot which supports four lightweight metal arms. View Details

The Circle Kit is provided with a set of three circular discs having the different radius. View Details

It has certain number of equally spaced Peg and arranged on two different circumference of a circle and one peg at the center. View Details

This model can be used to find height and distance of building etc. Our mathematical models are highly appreciated by teachers. View Details

This board game makes learning of coordinate geometry fun and easy. This coordinate board game with attractive colour counters View Details

The set consists of 4 section models of Cone Circle, Hyperbola, Eclipse and Parabola. View Details

The Counter Tiles are effectively used to help children understand spatial reasoning and mathematical concepts like probability, algebra and graphing. View Details

The colour plastic counters is being mostly used to bring home basic mathematics understanding among students. View Details

We our abacus makes a great classroom and home tool for learning mathematics. Starting your child early with mathematics brings View Details

We are offering a supreme quality assortment of Cross Vertical Staff. To align three offset objects in a straight line. View Details

Cuisenaire Strip is a collection of rectangular rods, each sized rod in distinct colours with a duly printed number on it. View Details

Plastic links in four colors promote hands-on discoveries in patterning, sorting, measurement, set theory, and number concepts. View Details

To Offered Comprise high painted wooden pieces that matchup with the specific end usage of the customers. View Details

The motor is spindle mounted and may be clamped by a thumbscrew so that the plane of the table can be set at any angle. View Details

The right-hand chamber has windows in the top and back end, when used with a clear front window, acts as a control chamber View Details
A beautiful model of cockroach dissection (male) showing prothorax, metathorax, mesothorax, terga I-X, abdomen and all parts of digestive system View Details

School Lab Instrument is a leading Compact Balance manufacturers, suppliers and exporters View Details

School lab Instrument is a leading Carboy With Stop Cock manufacturers, suppliers and exporters View Details

School lab Instrument is a leading Calcium Chloride Tube, Borosilicate Glass manufacturers, suppliers and exporters View Details

School lab Instrument is a leading Conical Measures manufacturers, View Details

School Lab Equipment is a leading Cork Borer Set manufacturers, suppliers and exporters from India that offers wide range of Cork Borer Set at most competitive prices. View Details

School Lab Equiment is a leading Cryo Vial Internal Thread manufacturers, suppliers and exporters from India that offers wide range of Cryo Vial Internal Thread at most competitive prices. View Details

School Lab Equiment is a leading Cryo Vial manufacturers, suppliers and exporters from India that offers wide range of Cryo Vial at most competitive prices. View Details

School Lab Equiment is a leading Cryo Coders manufacturers, suppliers and exporters from India that offers wide range of Cryo Coders at most competitive prices. View Details

School Lab Equiment is a leading Cryo Rack manufacturers View Details
.jpg)
School Lab Equiment is a leading Cryo Box (PC) manufacturers, View Details
.jpg)
School Lab Equiment is a leading Cryo Box ( PP) manufacturers View Details

School Lab Equiment is a leading Cuvettes, Plastic manufacturers, View Details

School Lab Equiment is a leading Cuvettes, Glass manufacturers, View Details

School Lab Equiment is a leading Condensers, Liebig, Borosilicate Glass manufacturers, suppliers and exporters from India that offers wide range of Condensers, Liebig, Borosilicate Glass at most competitive prices. View Details

The Class Rock Pack provides a complete lesson. Based around a central laminated flow chart, students can work through identifying igneous, metamorphic View Details

A teacher's guide with answers is provided. A learning about Rocks and their properties a ball View Details

Depicting in diagrams and letters various conventional signs of communications, Water bodies, religious places etc. as shown on maps. Printed in multicolour on 80 gsm map litho paper. Laminated with hot seal polyester film on both sides. View Details

Color: Multicolour Showing latest boundaries. Political features. Capital cities and important towns. Printed in multicolour on 80 gsm map litho paper. Fitted with first quality plastic rollers at top and bottom. View Details

Using the latest printing technology. Charts are printed on art paper in full color. Fitted with plastic rollers. View Details

Available in English language only. Laminated on both sides with thick plastic film. View Details

View Head : 45° rotatable Light Source : halogen bulb View Details

Body: Inclined Binocular Body, Rotatable through 360o Mechanical Stage : Large stable base View Details

Monocular viewing head with interchangeable 10x widefield and 25x widefield eyepieces, View Details

A dual illumination switch allows for three light setting options: top, bottom, or both. View Details

Condenser with reflux head. Feeding tank with 5 litres capacity. View Details

The flexible design of the equipment allows the user to develop many other View Details

Practical methods of controlling multi-variable electro View Details
Withlogo.jpg)
The Carbon residue values or crude oil, residue etc. are useful in the manufacture of various View Details
Withlogo.jpg)
The apparatus consists of a solid metal bath having 6 walls to accommodate cocking View Details

A glass jar for containing oils, jacket, disc and gasket as specified are View Details

Here using this setup one can calibrate different types of Load cells View Details

Connected instar with safe discharging resistors View Details

The stater is cut away by 1/4 over the entire length to enable an optimum View Details

The flow is measured by a rotameter View Details

The Compressor Fault Simulator is designed to give students experience with troubleshooting View Details

Electrical requirements: Single phase, 220V AC, 60 Hz, 40A (115 VAC, 60 Hz for water tower). View Details

The used pressure component is triggered by direct vapor-pressurizing so the system View Details

Storage Room : 4 Ft x 4 Ft x 4 Ft with double wall insulated. View Details

This trainer is also checked on several quality parameters to assure its flawlessness View Details

The digital signal processing section is in assembled open out P.C.B. Explanation, Observation View Details

Introduction to interfacing through C programming. View Details

Optimization of Control Loops. View Details

Supply Unit for Chemical Reactors. View Details

The moment is determined by adding or removing weights to the arm. View Details

The tunnel circuit also includes a diffuser and round to square transition sections upstream and downstream View Details
The liquid whose flow characteristics are to be investigated is placed in a removable thermostatically View Details

The apparatus is very useful for testing the cam performance for jump phenomenon during View Details

This set consists two contactors with a mechanical interlocking and two additional groups of contacts used View Details

Output voltage: 3x 0...400V, 50Hz variable. View Details

Swing over carriage : 110mm (4.3”). View Details

The properties of different chemical reactors can be investigated by performing a specification reaction using View Details

The glass is non porous allowing for easy cleaning or auto claving. View Details

Material: Polypropylene, Autoclavable. With screw cap. Used in laboratory. View Details

Simple and economical column- ideal for educational use. View Details

Made of Borosilicate 3.3 Glass. With socket and cone. View Details

With sintered frit (porosity: 0). With PTFE Stopcock (bore: 0-2.5mm). View Details

Upper socket can be connected to a stopcock adapter to control eluent flow. View Details

With PTFE Needle Valve Stopcock Upper socket can be connected to a stopcock adapter to control eluent flow. View Details

Fritted Disc. These gravity chromatography columns are manufactured from medium wall tubing. View Details

Without glass jacket, horizontal and lateral indentations. View Details

Material: Borosilicate Glass 3.3. With NS socket and NS cone. With fixed vacuum jacket. View Details

Material: Borosilicate Glass 3.3. With NS socket. View Details

With beaded rim. With PTFE stopcock and retaining device. View Details
Effective length with 14/23 socket, 19/26 cone and fused sintered disc. View Details
Reduction adapter with 19/26 socket and 24/29 cone. View Details

Material : Borosilicate Glass. Heat Resistant. View Details

Lab Glassware bottle type with interchangeable joints, rubber bellows. View Details

These are extensively demanded by clients owing to its rugged construction and effective performance. View Details

Ideal for mixing liquids. Made of Borosilicate Glass. Heat resistant. View Details

Convenient insertion and removal of tubes. Can provide clear view the tube contents. View Details

Material: Borosilicate glass. Heat resistant. Chemical resistant. View Details

Graduated conical centrifuges with labeling writing area. View Details

High mechanical and shock resistance. Printed in white color enamel. View Details

Suitable for Distillation and Reflux Applications. View Details

Large Cooling Capacity. O.D.40mm In Jacket Length. Coil O.D. Is 8mm. View Details

These apparatus are manufactured by our expert professionals, who hold vast experience in this domain. View Details

Made from Heat Resistant, Low Expansion 3.3 Borosilicate Glass View Details

These products are manufactured using high-grade copper and other materials along with sophisticated View Details

Condenser has a standard taper outer joint at a 15° angle to the condenser and a lower inner drip tip joint. View Details

Material: Nylon Color: White. Used in laboratory. View Details

• Overall Length: 12 Inch. • pipe Capacity:49/16 Inches.
Note:
View Details
Galvanized machine table. Bayonet mounted rear table.
Note:
View Details
Diesel Engine Drum Capacity: approx. 240 Litres
Note:
View Details
For drilling and chiseling. Pointed short. Flat short chisels. View Details

School Lab Instrument comes equipped with a built-in 200 micro farad start capacitor. Designed for testing motor windings and jump-starting compressors that are locked up. View Details

We provide our customers with high precision Circular Saw Machine that are fabricated using the superior quality raw material.
Note:
View Details
Tilts table: 300mm Table : 12-1/2” - 21-1/4’
Note:
View Details
Hose/Pipe Crimping Machine, Sheet Crimping Machine, Cap Crimping Machine, Cable Crimping Machine.
Note:
View Details
Drilling Capacity: 16mm (0.6”) Worktable Size : 500 x 160mm (22” x 6.3”)
Note:
View Details
Drilling Capacity: 10mm (3/8”) Worktable T-Slot Size: 8mm (0.31”)
Note:
View Details
Machine size (Length x Width x Height) : 1460 x 760 x 1450mm Swing over bed : 250mm (10”)
Note:
View Details
The offered CNC Lathe Machine table is known to be one of the best that is available in the market.
Note:
View Details
Max. Turning Length: 100 mm Swing Over Bed: 150 mm Max. Turning Dia: 55 mm View Details

3/2 axis CNC controller for milling machine Generates Gcode via LazyCam or Wizards Fully customizable interface View Details

We provide a high quality of CNC Retrofit Kit for Conventional Universal Milling Machine.
Note:
View Details
The controller is a cost-effective CNC Lathe controller - with all the push buttons, selector switches and MPG.
Note:
View Details
6 axis movement, 6 axis interpolation linkage movement. System self-diagnoses and parameters backup, recovery function.
Note:
View Details
School Lab Instrument exclusively designed and developed the Trainer series for learning purpose.
Note:
View Details
CNC System with axis motors and drives Spindle with induction motor/servo motor Lubrication system View Details

This machine which is specifically designed for educational institutes offers hands-on experience of industrial machines. View Details

This is the ideal product for educational institutes which are looking to impart industrial training to their students as well as doing some light production activity on the same machine. View Details

MicroMill with New Powerful 1/4 HP spindle motor. Pulley set with the drive belt. View Details

Built-in spindle: 24000rpm Cutting Feedrate: 1 ~ 20,000mm/min
Note:
View Details
X travel: 130mm X repeatability positioning accuracy: 0.012
Note:
View Details
Mechanical repeatability 0.01mm
Note:
View Details
Under the supervision of our experienced professionals, we manufacture this machine using quality assured
Note:
View Details
The apparatus uses hydraulic analogy to represent the rotating slider. View Details

Reinforcement depth measurement Bar size can be preset if known or detected automatically View Details

Use:- Measurement of density and specific density, standard weighing. View Details

We are the manufacturer of all type of Centre Lathe Machine. Such as Light Duty, Medium Duty, Heavy Duty
Note:
View Details
Made of spring-tempered steel. Satin Chrome Finish. View Details










.jpg)
