Calibration of Load Cells Manufacturer,Supplier and Exporter
Product Code : SEL-MACL-11072
Quick Answer: Three load cells, of beam, 'S' and compression type, can be calibrated on the Calibration of Load Cells set-up, using common weights up to 20 kg in 1 kg steps and a 3 1/2 digit indicator.
Last updated: October 2026
Key Features
Beam type, 'S' type and compression type load cells, one of each
Common mechanical set-up to fit the different load cells
Common weights, max 20 kg in steps of 1 kg
Common indicator with signal conditioning circuit
Digital indicator, 3 1/2 digit, least count 0.1 kg
Powder coated enclosure
Technical Specifications
Specification
Value
Load cells
Beam type (1), 'S' type (1), compression type (1)
Weights
Max 20 kg, in steps of 1 kg
Indicator
Digital, 3 1/2 digit, with signal conditioning
Least count
0.1 kg
About This Product
Calibrating a load cell means applying known weights and recording what the indicator shows, so that its output can be related to force. With one indicator and one mechanical frame shared by all three cells, students follow the same calibration procedure on each type and can compare how they respond. The Calibration of Load Cells can be exported to Sri Lanka, Uzbekistan, Burkina Faso, Luxembourg and Slovenia.
Frequently Asked Questions
Which load cells are included?
One beam type, one 'S' type and one compression type load cell, all fitting the common mechanical set-up and read on a common indicator.
Withlogo.jpg)
Withlogo.jpg)
Withlogo.jpg)